Diese Webseite nutzt Cookies zur Verbesserung des Erlebnisses unserer Besucher. Indem Sie weiterhin auf dieser Webseite navigieren, erklären Sie sich mit unserer Verwendung von Cookies einverstanden.

Einige dieser Cookies sind technisch zwingend notwendig, um gewissen Funktionen der Webseite zu gewährleisten.

Darüber hinaus verwenden wir einige Cookies, die dazu dienen, Informationen über das Benutzerverhalten auf dieser Webseite zu gewinnen und unsere Webseite auf Basis dieser Informationen stetig zu verbessern.

Folding door FE "Teckentrup 50"

 
 
Folding door FE "Teckentrup 50"

✔ DOUBLE-WALLED, HEAT-INSULATED
✔ EXCELLENT THERMAL INSULATION UD = 1,8 W/m2k
✔ STORM-PROOF UP TO WIND CLASS ± 4 
✔ ENERGY-SAVING
✔ OPTIMISED DESIGN


Folding doors are commonly installed in very wide hall openings up to 16 meters, but also wherever spatial relationships are constrained inside or around the lintel. The Teckentrup FE "Teckentrup 50" folding door offers maximum security and reliability. The high levels of stability also enable use in areas subject to high winds, e.g. in mountainous and coastal regions.

Technical data Folding door "FE 50"

 
 
Performance characteristics

Resistance against wind loads per EN 12424
   class 4 (tested with 2500 Pa) 

Air permeability: per EN 12426  
   class 3 (<6 m³/hm² at 50 Pa)  
   class 4 (<3 m³/hm² at 50 Pa)

Thermal insulation: EN 13241-1, Annex B EN 12428
   UD in W/(m²K)* (installed door 3,5 x 3,5 m)
   PU foam: 1,9 | Mineral wool: 1,8 | Mineral fibre board: 2,0

Noise insulating (ISO 717-1)*
   PU foam: 26 dB | Mineral wool: 32 dB

Water penetration resistance as per EN 12425
   with/without bottom buffer*
   PU foam: class 2 (50 Pa), class 3 (120 Pa)


* The achieved classes depend on the door models and equipment.

Installation in

• Masonry
• Concrete
• Autoclaved aerated concrete walls
• Steel designs

Size range

Modular dimensions:
Width:  2250 – 16000 mm
Height: 2000 –   5000 mm

Surface

• Galvanised door leaf featuring coil coating similar to RAL 9016
   (traffic white) or galvanised blank. Galvanised door frame.
• Optionally primed powder-coated in RAL of your choice
   (mineral wool version only)

Door leaf

Made of box-type edged steel sheets with all-round mount for
EPDM rubber accident profile (GUP). With top and bottom leaf
seal and mounting bracket. Door leaf thickness: 50 mm

• Insulation: PU foam
   Surface: primed similar to RAL 9016

Alternatively:
• Insulation: permanently bonded mineral wool,
   metal sheet thickness: 1.0 mm
   galvanised Surface: primed similar to RAL 9016
• Insulation: mineral wool,
   Metal sheet thickness: 1.5 mm galvanised
   Surface: galvanised blank,

Metal sheet special equipment:
• 1.0 mm PU foam
• 1.5 mm mineral wool (permanently bonded)

Door frame

Lateral frame made of rectangular 50 x 90 mm pipe. Top frame profile with
guide rail (U-profile) and relief level. Featuring bottom buffer at the bottom.
Installation in soffit.

Special equipment:
installation in front of soffit. Possible without bottom buffer.
(For leaf coupling ≥ 4 leaves units per side require a bottom buffer.
On request for large-scale glazing.)

Special equipment

• Black steel/stainless steel hinges
• Door stop/rubber buffer between leaves
• Divided active leaf including buffer seal*
• Wicket door without threshold including buffer seal*
• Wicket doors with threshold including buffer seal
   (not approved for panic exits)
• Wicket door always featuring central end leaf
   and two security bolts
• Panic lock (latch lever function E)
• Louvres, rain canopy
• Fire brigade release function with pull rope
   for 2:2 folding method
• Motor with dead man control
• Pulsecontrol for power-operated doors as per
   EN 12453 (tested design version)

  * (with panic function)