Diese Webseite nutzt Cookies zur Verbesserung des Erlebnisses unserer Besucher. Indem Sie weiterhin auf dieser Webseite navigieren, erklären Sie sich mit unserer Verwendung von Cookies einverstanden.

Einige dieser Cookies sind technisch zwingend notwendig, um gewissen Funktionen der Webseite zu gewährleisten.

Darüber hinaus verwenden wir einige Cookies, die dazu dienen, Informationen über das Benutzerverhalten auf dieser Webseite zu gewinnen und unsere Webseite auf Basis dieser Informationen stetig zu verbessern.

Industrial sectional door "SW 40"

 
 
Teckentrup industrial sectional door SW 40

HIGH-QUALITY STEEL SLATS, 40 MM THICK
DOUBLE-WALLED, PU INSULATING FOAM
MODERN HIGH-TECH LOOK

The industrial sectional doors from the 40 series are based on a double-walled and 40 mm thick door leaf design. As standard, they are equipped with a special PU hard foam core and are thus commonly used in logistics and production centres, agricultural enterprises or warehouses. The Teckentrup SW 40 steel sectional door is primarily suited for use in harsh environments and is distinguished by its robust construction and numerous design options.

Technical data

Performance characteristics (per EN 13241-1)

Thermal insulation: EN 13241-1, Annex B EN 12428
   - U = 0,56 W/(m²K) (panel 40 mm)
   - U = 1,2 W/(m²K) (complet. door without wicket door)
   - U = 1,4 W/(m²K) (complet. door with wicket door) approx. 25 m2 door area²

Resistance against wind loads per EN 12424
   - class 2 (max. Pa) (without/with wicket door)
   - class 3 (max. Pa) (without wicket door)
     (up to 6.500 mm door width optional)

Water penetration resistance: per EN 12425
   - class 2/3 (without wicket door)
   - class 1/3 (with wicket door)
   
Air permeability: per EN 12426
   - class 3 (without/with wicket door)

Fire performance: per DIN EN 4102
   - door leaf element building material class B2

Noise insulation value per EN717-1
   - Rw = 24 dB

Installation in

• Masonry
• Concrete
• Steel structures

Size range

Modular dimension:
Width:   2000 - 8000 mm
Height:  1875 - 6000 mm
(more dimensions on requets)

Door leaf

• Consists of individual door sections, galvanised steel sheets;
   installation depth: 40 mm Insulation: polyurethane foam
• Surface: Panel exterior horizontally ribbed, stucco-patterned
   or micro-profiled or without ribs, interior always stucco-patterned

Glazing

• Glazed strip as separate section made of aluminium
   profiles; cold-rolled section without thermal separation:
   AL-MG-SI 0.5
• Anodised E6 / EV1 surface
• Filled as standard with 20 mm synthetic double glazing,
   colourless, synthetic holding strip, black with seal
• Additional fillings with triple glazing, 5-chamber multi-skin sheet etc.

Drives

• Shaft drive, chain drive, three-phase voltage 400V 3~Ph, 50 Hz,
   60% ED, protection class IP 65, with emergency hand crank,
   TÜV approved
• Shaft drive with alternating voltage 230 Volt 1~Ph, 50 Hz,
   60% ED, protection cl. IP 65, with emergeny hand crank,
   TÜV approved, combined with a frequency converter control
   with “soft”-start and “soft” stop
• Direct drive as springless door without weight compensation,
   three-phase voltage 400V 3~Ph, 50Hz, 60% ED, protection
   class IP 65, with emergency hand crank, TÜV approved,
   safety device integrated

Control

• For shaft and chain drives, ready to plug pre-wired and with CEE-plug.
   In the basic usage noticed as deadman-control. Function without
   closing edge safety device, control voltage 24V safety extra low
   voltage, protection class IP 65, push buttons open-stop-close
• Pulse control (automatic mode “close“) in connection with closing
   edge safety device
• Radio remote control
• Automatic closing in combination with traffic lights
• Traffic control

Special equipment

• Casing
• Fixed panels
• Matching side door N53 with upper casing
• Stop rail
• Ventilation grille
• Special RAL-colours